Home / Guides / The first start after a used BMW engine is installed

start

The first start after a used BMW engine is installed

The first start after a used BMW engine is installed

The first start is a procedure, not a celebration. The BavarianMotors.org workshop records the engine code on the crate tag before the unit is photographed.

  • BavarianMotors.org
  • bavarianmotors.org
  • start
  • BMW engine
  • Hamburg

What to look at

The first start after a used BMW engine is installed

The first start is a procedure, not a celebration. The BavarianMotors.org workshop records the engine code on the crate tag before the unit is photographed. Prime the oil system before the engine fires. A dry start on a fresh used engine is a common way to damage bearings that were fine in the crate.

Fitment

Use the oil grade the engine family requires, fill the filter, and check for leaks at the cooler and the sump plug before the car is driven.

What the workshop records

Coolant is bled with the heater open and the front of the car level. An air lock looks like a head-gasket failure and often is not one.

How to place the order

Listen for a minute at idle. A rattle from the timing drive or a knock that was not in the workshop notes should stop the job before a road test.

FAQ

Does BavarianMotors.org ship the engine to the address on the order?

Yes. Shipping is a flat 299,00 € from the workshop in Hamburg to the address written on the order. A forklift or an engine crane is required at delivery.

How long is the warranty?

Eligible engines carry up to 12 months on internal failure after a correct installation by a workshop. Mismatched fitment, a dry start, and the wrong oil are not covered.

Which page should I use to compare engines?

Start with all guides on bavarianmotors.org, then open the listing that matches your VIN.